Skip to product information

Echo® MegaLoop Pro™ with remote control

£146.00  exc. VAT
£175.20 inc. VAT 
SKU: LH638

The Brand NEW Echo ® MegaLoop Pro ™  is THE ONLY INDUCTION LOOP AMPLIFIER WITH REMOTE CONTROL ON THE UK MARKET. It is easy to connect to most modern digital TVs, with either line and/ or digital inputs (Phono Phono/ Toslink/ Coaxial).

The MegaLoop Pro ™ Induction Loop System has an integrated Digital Audio Converter, making this the easiest loop system to connect to modern televisions using the digital optical output socket on the TV. It is easy to install with just one Toslink Cable, which is provided.

The MegaLoop Pro ™ converts digital audio signals providing you with amazing sound quality. An induction loop system takes sound from your TV or other sound source and converts it into a signal which is fed into a wire fitted in a continuous loop around the edges of the room. This signal can then be picked up by a hearing aid switched onto the ‘T’ setting. The tone and volume can then be adjusted completely independently from that coming out of the TV speaker, so that the television volume can be set at a comfortable level for others.


  • NEW Remote Control
  • Capable of meeting BS. EN 60118-4:2006 for a loop area not exceeding an area of 90 sqm (9.5m x 9.5m)***
  • Connects with modern televisions
  • NEW integrated digital audio converter
  • Easy trouble-free installation
  • Outstanding sound quality


*** PLEASE NOTE: The New MegaLoop Pro is a more powerful loop that can cover a larger area than a standard room loop system. Loop wire recommended areas for areas covered according to BS EN 60118-4-2006: 

  • 16 sqm to 40 sqm – 0.75mm csa
  • 40 sqm to 65 sqm – 1mm csa
  • 65 sqm to 90 sqm – 1.5mm csa


Capable of meeting BS. EN 60118-4:2006 for a loop area not exceeding an area of 90 sqm (9.5m x 9.5m) A larger loop area can be used if a lower signal strength is acceptable which will depend greatly on your hearing aids or receiver.

Coverage is dependent on the specific installation. Irregular shaped areas, proximity to large metal structures, positioning of the loop cable etc will affect the field strength. 

      What are included in Megaloop Pro set?

      • Megaloop Pro Amplifier
      • MegaLoop Pro Stand
      • Remote Control
      • Mains Power Adapter
      • Loop wire 0.75mm CSA (38 meters)
      • Clips
      • Microphone with lead
      • Scart Plug
      • Phono phono lead
      • Toslink Cable
      • 2 AAA Battery


        PDF icon MegaLoop instruction manual
        PDF icon MegaLoop declaration of conformity
        PDF icon Digital to Analogue Audio Converter instruction manual
        PDF icon Digital to Analogue Audio Converter declaration of conformity


          Technical Information

          Power Supply 12v DC. 3.0 amp positive centre
          Output Output current > 4amp peak current into 0.4ohms
          Frequency response 100Hz to 5.0khz
          Tone Control Effect +/-3db range @200Hz and 5KHz
          Microphone 2 microphone inputs 3.5mm mono/electret condenser
          Line Input 2 line-level input, 3.5mm stereo connector with gain control
          Digital Input 1 line-level optical input, Toslink connector with gain control
          Digital Input Coaxial input
          Dimensions 190mm(W) x 45mm(H) x 112mm(D)
          Line Audio input nominal Level 100mV
          Microphone P input Nominal level -60dB
          Microphone 1 input Nominal level -44dB (Background noise switch low) -50dB (High)
          AGC >30 dB range
          Weight 441 grams
          Loop output impedence Between 0.4ohm and 1.0 ohm

            Digital to Analogue Converter

            • Input Audio Coaxial or Toslink digital audio;
            • Output Audio L/R audio;
            • Input audio connector Toslink, 1 X RCA (Coaxial);
            • Output audio connector 2 x RCA (R/L);
            • Sampling rate 32, 44.1, 48 and 96 KHz.